Alcohol-based fuel emulsifier, bio-oil additive, method for preparing alcohol-based oil
Bio-alcohol oil emulsifier (additive) is a high-strength catalyst that can effectively increase the heat of bio-alcohol oil. Adding it can increase the / of the original bio-alcohol oil. The calorific value can minimize the emission of toxic gases and make methanol molecules more stable, thus greatly reducing volatilization and making bio-alcohol oil safer during production, storage, transportation and use. The bio-alcohol oil emulsifier produced by bio-alcohol oil has been widely used across the country and has gained users for more than 10 years. The use of bio-alcohol oil emulsifier makes bio-alcohol oil production simpler. Users only need to purchase methanol without using other chemical raw materials, which greatly reduces the production cost of bio-alcohol oil. Just add emulsifier to methanol and stir for a few minutes. Bio-alcohol oil with high calorific value uses bio-alcohol oil emulsifier to lower production costs and save investment. We encourage the use of economical alcohol raw materials such as recycled methanol, waste methanol, crude methanol, waste alcohol, etc. It is no longer a dream to start a small business. Everyone is welcome to bring your own alcohol base. Fuel or methanol samples come to the test. Just add a little bit to make your bioethanol oil burn red immediately. You don't have to worry about customers complaining about insufficient fire power. Just a little bit makes the methanol burn red and make your life red!
The methanol fuel additive that our company has researched with great concentration not only solves the historical problem of insufficient calorific value of alcohol base and large dosage, but also adds the alcohol base fuel additive to methanol to increase the stability of methanol and reduce volatilization, which lasts longer and burns longer, and the firepower is greatly improved. The cost is greatly reduced, it is non-flammable, non-corrosive, safe to use, energy-saving and environmentally friendly, and there is no fuel shortage problem. Alcohol-based fuel is clean, energy-saving and environmentally friendly. The fuel has high oxygen content and is fully burned, with no black smoke, no carbon deposits, no black pot bottom, and no residual liquid residue. The exhaust gas emissions after combustion are much lower than those of petroleum liquefied gas.
The unique chemical properties of methanol fuel additives can maximize the stability of methanol. Methanol is a highly volatile flammable liquid with extremely low stability. Methanol can change from liquid phase to gas phase at high temperatures, which is methanol vapor. Excessive inhalation of methanol vapor will cause blindness, blurred vision, headache, chest tightness, and poisoning symptoms. It is very harmful to the human body and a large amount of evaporation will also reduce the quality of the oil and cause waste. Therefore, the properties of methanol must be changed during the production and use of methanol fuel to make it more stable and safer during production, storage, transportation and use. With the methanol fuel additive, producing methanol fuel is simple and safe. Just add the methanol fuel additive to the methanol solution and stir it thoroughly for a few minutes. For example, add methanol fuel additive to the methanol solution and stir for a few minutes.
Methanol fuel additive is a powerful combustion accelerant. It not only has a strong combustion-supporting effect, but also has dual energy to keep the chemical reaction stable. When the combustion temperature reaches the temperature, the primary reaction begins to decompose and release oxygen to derive manganese dioxide and other catalysts. When it reaches about 100°C, it enters the next stage of reaction, causing more oxidants to decompose at high temperatures to release a large amount of oxygen. The mixed reaction of multiple super-powerful combustion accelerants causes the fuel to be in a strong catalytic decomposition reaction when the temperature of the fuel enters the furnace begins to reach about 10°C. Let the combustibles in the methanol fuel fully burn with fierce fire and high flame bed length to achieve the purpose of improving the thermal efficiency of the furnace, super combustion-supporting and energy-saving.
Product price New model sample kg/barrel yuan (yuan/kg)
Wholesale kilogram/barrel yuan (yuan/kg)
Kilogram/barrel yuan (yuan/kg)
Old style Sample kilogram/barrel yuan (yuan/kg)
Wholesale kilogram yuan (/kg)
Kilogram yuan (yuan/kg)
Business consultation manager Zhou
Alcohol-based fuel emulsifier, bio-oil additive, method for preparing alcohol-based oil